100% No-Risk Money Back Guarantee
MAKE WATERING LESS OF A CHORE.
QUALITY FOR YOUR GARDEN.
CONNECT. STICK. TURN IT ON
DIY any drip irrigation system with the right configuration for your needs. With 50 ft. of 1/4" tubing you can easily create an irrigation system (single circuit), with a pressure between 15 and 45 PSI, that delivers up to a maximum of 80 gallons/hour. Use the dripping tube to branch off from 1/2" tubing to run water to 1/4" emitter tubing or emitter devices. Once set up, watering is a breeze!
- Tanya Yinger
"As I have been adding more raised plant beds to my greenhouse and also raising the soil levels through the use of grow bags, I found that I needed to add more emitters and tubing to my drop system. This should be more than enough for my uses."
- Kurt G. Schumacher
- Javaman
"There is plenty of hose in this package for most projects. It is the standard 1/4 inch which seems to be standard for drip irrigation kits, but check your set up. The hose seems strong but it isn't difficult to cut to size. I was waiting for the last frost to set this up so I hope I waited long enough in the year. I shall see how well this survives the Texas summer. If I can get a couple of years out of the hose, I'll consider it a great value."
- T Stanley